The Self Bondage Ballet Practice Setup

I recently came across the excellent “kevlar” Software in a post on this forum. This sparked an idea for a Self-bondage scenario. (My English isn’t perfect, so forgive any errors) Here is what you need: The setup requires a ceiling where six screws can be fastened: two screw pulleys and four screw eye bolts. Then there are three cords: one about 6m long, another around 4m, and a third approximately 1m in length. You also need two small bags for weights, plus either two pairs of nipple clamps or just one with a testicle parachute. Additionally, you will require a chain and a sturdy collar that attaches to one of the ceiling hooks. A pair of handcuffs should connect to a waist belt or chain. Finally, include a colored dildo that can be mounted on the wall or shelf. For release, you need a computer, monitor, and webcam. The PC must have a CD-ROM drive, and kevlar’s SBBJ software needs to run on it. It doesn’t need to be a brand-new machine; kevlar has also provided a Linux/Ubuntu version that runs well even on an Atom CPU (though some bug fixes are still pending). This should be tested multiple times and adjusted to your specific needs. Of course, don’t forget a secondary release mechanism—in my case, it’s the “frozen cord in ice” method. A third Safety-Release is also highly recommended. The screen should be placed at an eye-catching height, ideally close by where the dildo is fixed. The dildo can be slightly softer since the software detects cheating when you bend it down, which adds penalty points. Ensure the webcam is securely positioned and aligned to capture the entire dildo; a color distinct from your face, hair, or background works best. A ring gag can be used as an option too, creating a lovely image of helplessness. Crucial are also a pair of ballet or pointe shoes. You may wear clothes—a beautiful, sexy ballet outfit looks great—but you can go naked during the session. First, check the weight for the nipple clamps. The cord running from the clamps to the weight bag should be set so there’s no pulling out when you are fully on your toes. In this position, the clamps may cause only little pain (or very little). When your feet return flat to the floor, the weight will pull against them, creating an appropriate painful effect. Next, measure the weight of the clamps/weight in the genital area. This should be balanced so it lifts off the ground only when you stand on tiptoes. Note that beginners shouldn’t take heavy weights initially because movement increases pain over time. The cord for the nipple clamps passes through the two installed pulleys; use proper pulleys as friction from eye bolts can sometimes make weight control difficult. The other cord for the genital area connects directly to the weight. To enhance this effect, you might add a spreader bar between your legs. For your main fixation, use a chain or rope leading from the collar to the wall or ceiling. It shouldn’t be too tight since you need freedom to move up and down to reach the dildo easily. The handcuffs locking your hands behind your back should secure with a belt or waist-around-chain so you can’t accidentally reach the key or clamps. Position the key so it’s unreachable by hand or mouth unless you complete the Blow-job-Scenario, or if the Safety-Release drops the key toward your hands. Ensure the key is heavy enough to pull down the cord from the open CD-ROM drive smoothly; add a somewhat heavy ring if needed. Also, ensure this cord doesn’t slip completely through the eyelets, otherwise the key falls and becomes inaccessible. Once you’ve checked the Safety-Release, attached the nipple clamps and weights, closed the fixation chain and collar on your neck, start the program and wait for it to begin. Take some time to tuck your hands behind your back and lock the handcuffs. With that final audible click, you know you’re about to spend some time in self-bondage heaven/hell. The software begins with a beep. You’ll be forced onto tiptoes, reaching for the dildo. Each „Suck“ must hit the correct mark on the dildo; otherwise, Blow-jobs are added to your total. This affects Release-time because more sucking means longer completion time. Initially simple, after just a few minutes you start lowering from your toes as muscles weaken slightly. Now weight pulls on your nipples while waiting for the next „Suck it“ command. With another beep, rise back onto tiptoes to lift that genital weight into the air. You might have forgotten about this slight pain earlier, but now it’s back. While relief comes to the nipples, legs may not hold out long enough to enjoy fully. A real challenge is performing “Deep Throats”. Back „En Pointe“, balance carefully until software confirms the “Deep Throat”. If wearing a ring gag, the dildo won’t help with ballerina balancing; you must insert it deeply into your throat to maintain balance level. This requires true training. You’ll crave feeling ground under feet again while weight mercilessly pulls on nipples… beep … and back onto tiptoes to caress your favorite master’s dildo. After a while, everything else fades away. Only you remain with your virtual master, his erect cock, and the sweet pain of your endless drive as excitement builds within yourself. Since I wanted more challenge, naturally increased “Sucks” and “Deep Throats.” This is when awareness hits: nipples suddenly feel unprecedented pain, genitals ache, body cries for Release. In this brief moment back in reality, look at screen realizing half-way point hasn’t been reached yet. beep. „Up on your toes ballerina. Lessons not over. Suck it“

You forgot the tutu...:whip::twisted: Because ballerinas wear them. They are so cute, especially on a male slave...:love: Jenny.