tighter adjustable nipple clamp using pegs

It took me a surprisingly long time to discover this very straightforward method for not only securing pegs more firmly but also making them adjustable to some extent.

This approach relies on standard plastic pegs. There is no need for drilling or even tweaking the pegs themselves! You simply use two pegs instead of one and ‘combine’ them. It’s so basic that I feel a bit silly bringing it up in the DIY forum…

Here’s how to do it, illustrated with pictures: Grab two pegs like these (blue is the first peg, yellow is the second): Image Position the first peg on your nipple as you normally would, then place the second peg perpendicular to the first one, just as shown below: Image You can control how tight it is by sliding the second peg toward the end of the first. The top image shows the loosest setting, while the bottom image displays the tightest: Image

That’s basically it. You could keep going and add another peg onto the second one… Alternatively, you can place two pegs on top of the first. Enjoy!