vibrator patterns and ideas

I’m working on building a new controller for my vibrator. Does anyone have some good ideas to pattern it can run in?

Actually, I’ve only seen five options:

1. Constantly lit when the power is adjustable.
2. Ramp up from 0 to 100% power and speed can be adjusted.
3. Ramp up and down from 0 to 100 and back to 0%, where power and speed can be adjusted.
4. Pulses with maximum power, with the speed being adjustable.
5. Two short pulses followed by one long pulse at maximum power, where the speed is adjustable.

I also made a random function and a music function.

I imagine it will have two or four channels so that it can control up to four vibrators. First, you choose which pattern you want to run on the selected output; then, you select the repetition factor mask: for example, pattern 1 runs 3 times, pattern 3 runs twice, etc., with only two possible repetition factors available; finally, you choose the output mode:

1. Normal mode: each output runs its own commissioned program independently.
2. Sequential: run the program booked at exit 1 first, then move to output 2.
3. Synchronous simultaneous: Run the programs booked on outputs 1 and 2 simultaneously.
4. Reverse sequential: Run the program ordered for output 1 but run it in reverse order on output 2.

Finally, bring good ideas and patterns that can be used:-) Greetings, satlars