The pain.exe and exit.exe Files for the Fitness Unpersonal Trainer

Here I will share the pain.exe and exit.exe files needed to run the “Fitness Unpersonal Trainer”. If you’re unfamiliar with what I mean, please check out: the archived discussion I’ve organized the files into categories based on the teasing methods employed (CD tray, servomotor, activated by sound devices, etc…) I’ll continue adding new files and updating this first post. I hope that people who know how to compile small programs can contribute. ******* CD 1 Tray Opening Teasing** It opens the first CD unit’s tray and pushes a switch. After 5, 10 or 20 seconds it closes the CD Tray. Not suitable for laptops (they cannot close the CD Tray)!!! Image Image

******* CD 2 Tray Opening Teasing** Same as above but it opens the second CD unit’s tray and pushes a switch. After 5, 10 or 20 seconds it closes the CD Tray. Not suitable for laptops (they cannot close the CD Tray)!!! Image

******* CD Tray Opening Release Method** Same as using the Selfbondage CD Tray Opener. It opens the first CD unit’s tray, releasing the key. Can be used with laptops. Image Image

******* CD Tray 2 Opening Release Method** Same as using the Selfbondage CD Tray Opener. It opens the second CD unit’s tray, releasing the key. Can be used with laptops. Image

******* Activated by sound teasing devices** The program plays a sound that activates devices like antibarking dog collars. Sound can last 5, 10 or 20 seconds. Image Image

******* Activated by sound teasing devices playing your own mp3’s +++++NEW (August 2011)** Same as above but this time the program looks in its own folder for mp3 files and plays one of them randomly. (if there aren’t mp3 files it simply closes itself). Image ******* Activated by sound teasing devices with sound at 50Hz** Same as above but the sound is at 50Hz for those with homemade teasing devices requiring this kind of sound. Image

******* Arduino board with one servomotor as teasing** My favorite one. One arduino connected by USB cable to computer and one servomotor. Image To use it you’ll find a .dll and a .pde file inside the zip. Upload the pde to the arduino and put the .dll in the same folder as pain.exe. It works with an Arduino board on Com port 4 and a servo controlled at pin analog 9. Can rewrite the program for other Com ports or other pins. The servo will be at 90 degrees during the session and will move to position 0 degrees to push any switch, then after 5, 10 or 20 seconds it moves back to the 90 degree position. Image

******* Arduino board with one servomotor as release method** Same as above. Com port 4 and pin 9 servomotor. The servo will be at 90 degrees during the session and moves to position 0 degrees for releasing the key. Image Image

******* Combined CD Tray Opening and Sound Teasing** Both at the same time. A sound to activate teasing devices controlled by sound, plus the CD opening and closing after 5, 10 or 20 seconds. Image

And that’s all for today:)