Arduino Blow Job Trainer Concept

Okay, the concept is to use an Arduino controller along with a E/T 312 stim box. I’d place two photocells inside a dildo: one just beneath the head and another about three-quarters down towards the base. A thermistor would sit at the bottom (more on that in a moment). The Arduino monitors whether the top photocell detects darkness, ensuring your mouth or tongue stays attached if a ring gag is used. It also checks if the lower photocell transitions from light to dark. Adding a parameter to expect changes in cycle rate would be great too. If these conditions are met, the Arduino plays a pleasurable audio file; otherwise, it triggers punishment (the 312 has both mic and audio inputs—see below).

Now for the thermistor: place one at the base of the dildo or even on the balls so you have to touch it with your chin. At random intervals, the Arduino can ignore the photocells and check the thermistor’s temperature instead. You’d need to deep throat it and hold steady until the resistor reaches a minimum temp. If the temp isn’t right after three seconds (or whatever duration is set), it switches to punishment mode until the target temp is reached, then returns to monitoring the photocells. LEDs corresponding to each sensor would be helpful too; you could simply cover them if desired.

If the Arduino can produce sound directly, maybe we can use its mic input for punishment since a sudden beep feels more abrupt than continuous audio. The primary audio input handles the pleasurable files. Both might need to remain as standard audio because when bound, you can precisely adjust levels on the 312. I’m thinking of using a really harsh waveform file with just the right frequency so that at your set level, it remains unpleasant.

Yes, having the Arduino control these levels would be cool. However, since I’m new to Arduinos and haven’t even bought one yet, this might need to wait for an update after getting things working initially. Some servos on knobs could make simple adjustments…

Also, audio functionality like might be usable here—I’ll confirm later.

So what do you think? As I mentioned, I’m new to Arduinos and don’t have one yet. Could anyone guide me on which version or kit to buy? How close can we get to my description through programming? Feel free to suggest improvements!