Release of the Selfbondage CD Tray Opener

I just tested it out today and am releasing the updated Selfbondage CD Tray Opener. Image Since this is the first version being released, there’s an input field where you need to type in how long you want to wait for the key to release: Image For safety, Selfbondage CD Tray Opener won’t accept time inputs longer than 360 minutes (which is 6 hours!). This limit exists because I doubt many laptops have batteries that last much longer than six hours. If you enter a too-long duration and press START, the program gives this response: Image When you input a valid time and hit START, you’ll see a countdown screen: Image You can leave that screen to open the CDTray simply by pressing Esc on your keyboard. While counting down, the program beeps every second. You can turn this off by unchecking this box: Image The Selfbondage CD Tray Opener 2.0 also includes a “Random” option. To use it you need to input the maximum time you want for playback and check: Image In random mode, the countdown screen appears like this: Image Here, the program doesn’t just count down; it can also pick up sound from a microphone and respond by moving a vibrator (such as an Ohmibod or similar device) Image I call this Teasing Mode, which you activate simply by checking the box: Image To play with this mode, you’ll need a microphone (any Windows-compatible one works) and a vibrator that can be activated via minijack (like an Ohmibod). Once checked, the program begins “listening” to the mic input (your sound level is shown in the progress bar): Image You can also increase accuracy by adjusting the microphone sensitivity settings on Windows. Next, we need to set the vibrator activation threshold. To do this, slide the slider to your desired position: Image During setup, the program plays a sound whenever you make noise louder than that threshold level (and if your vibrator is set up… there it goes!!). Use this setting wisely to calibrate how much noise triggers the vibrator. Once you press START, these settings are locked. If you try entering this mode without any microphone connected, you’ll always see a noise level of 100%. Finally, I added a random option for the vibrator as well; just check this box to activate it: Image This makes the vibrator pulse randomly during your session (again, you need an Ohmibod or similar device, otherwise you’ll only hear computer audio). All these modes can be combined, but remember that doing so will reduce battery life.

---

HOW TO CONVERT A WIRED VIBRATOR INTO AN OHMIBOD: In my specific case, the Ohmibod is quite small, so I managed to convert my butt plug (which uses batteries connected by two wires) into an Ohmibod-style vibrator. I have an inflatable buttplug like this one: Image After cutting off the original wires, I got this result: Image

( (wires 1 and 2) and this: Image wires 4 and 5. If we have a Ohmibod and look at the base it will appear like this: Image Just connect the wires as described and my buttplug becomes a new toy:) (of course it has to be connected to the computer with an audio jack and the batteries must be turned on while playing) You can download the program from:

and … er_2.0.exe Hope you like it, and sorry for the bad english level. Feedback will be much apreciated.